Polaris 2011 Ranger 400 - Manual (Page 40)

36
OPERATION
Driving On Slippery Surfaces
Skidding or sliding can cause loss of control or overturn (if tires regain traction
unexpectedly). When operating on slippery surfaces such as ice or loose gravel,
reduce speed and use extra caution to reduce the chance of skidding or sliding
out of control. Do not operate on excessively slippery surfaces.
Whenever riding on slippery surfaces such as wet trails or loose gravel,
or during freezing weather, follow these precautions:
1. Do not operate on excessively rough, slippery or loose terrain.
2. Slow down before entering slippery areas.
3. Maintain a high level of alertness, reading the trail and avoiding
quick, sharp turns, which can cause skids.
4. Engage all-wheel drive before wheels begin to lose traction.
NOTICE: Severe damage to the drive train may occur if the AWD is engaged
while the wheels are spinning. Always allow the wheels to stop
spinning before engaging AWD.
5. Correct a skid by turning the steering wheel in the direction of the
skid. Never apply the brakes during a skid.
WARNING
Sideways
skid
Turn in
direction of
skid