Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 305)

301
AU
X /
iPod
AUX / iPod
Input Cable Setup
To change an input cable:
1. Open the left console storage bin.
2. Locate the input cable and sealing
grommet at the bottom of the bin.
3. Carefully pull the cable inside the bin.
4. Disconnect the cable from the harness
by carefully pushing up on the green
tab. DO NOT ALLOW THE HAR-
NESS TO DROP BACK THROUGH
THE HOLE.
5. Install the desired input cable.
6. Carefully
push the
sealing
grommet
back into
the hole.
AUX Input
Cable
9922441.book Page 301 Monday, May 11, 2009 1:16 PM