Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 127)

123
Ope
rat
io
n
Operation
Using Cruise Control
Set Speed
1. Move the cruise control power switch to ON.
2. Accelerate to the desired speed and press the SET switch.
The cruise control indicator lamp will illuminate.
Tip:
• Cruise control can be set in any gear.
• The cruise control can be activated between speeds of 25-95 MPH
(40-153 km/h).
• Set speed will vary slightly in hilly terrain.
• The cruise control will not resume a pre-set speed if the resulting
acceleration or deceleration rate is too high or too low. For
example, if you are in 6th gear and try to resume a set speed from
40 MPH (64 km/h), the cruise may disengage.
• Cruise control will not engage if brake lights are not operating properly.
ON
SET
9922441.book Page 123 Monday, May 11, 2009 1:16 PM