Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 165)

161
Ma
inte
nan
c
e
Maintenance
Rear Suspension Adjustment
If the VICTORY air pump and gauge are not available, use the gauge provided in the tool kit,
and a pressurized air source with a maximum line pressure of 72 PSI (496 kPa). After using
this gauge, remove it quickly to minimize leakage. Expect to lose about 4 PSI (27.6 kPa)
with each pressure check when using this gauge. Use only a dry air source, such as a system
with a water separator or air line dryer, to prevent moisture from entering the shock.
CAUTION! Air pressure increases VERY quickly when using pressurized air. Wear eye and face
protection.
08 Maintenance.fm Page 161 Monday, May 11, 2009 2:03 PM