Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 180)

176
Maint
e
na
nce
Maintenance
Hydraulic Clutch Fluid
Check the hydraulic clutch fluid level. See page 103. The fluid level should be at or above
the top of the sight glass. Add fluid as needed. Replace cloudy or contaminated fluid.
Use DOT 4 brake fluid in the hydraulic clutch reservoir. Use fluid only from a sealed, clean
container. Review the brake fluid precautions on page 182.
Do not operate the clutch while the reservoir cover is removed. Fluid could overflow from
the reservoir and cause air to enter the fluid system.
WARNING! Using the wrong fluid or allowing air or contaminants into the fluid system can damage the
system seals or result in a malfunction that could lead to serious injury or death.
08 Maintenance.fm Page 176 Monday, May 11, 2009 2:03 PM