Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 206)

202
Maint
e
na
nce
Maintenance
Seat Removal / Installation
1. Open the glove compartment door and the fuel door.
2. Lift the console trim panel straight upward at each corner
to remove it. Do not tip the panel rearward.
3. Remove the two seat bolts.
Tool: 4 mm Allen wrench
4. Lift the front of the seat upward and pull forward to disen-
gage the tab at the rear of the seat.
5. To install, reverse the above process, being sure to engage
the tab at the back of the seat.
6. Tighten the seat bolts.
Torque: 36 in-lbs (4 Nm)
Seat Bolts
36 in-lbs (4 Nm)
08 Maintenance.fm Page 202 Monday, May 11, 2009 2:03 PM