Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 109)

105
Pre-Ride
Pre-Ride Inspections
Front Suspension
Inspect the front forks for oil leaks or damage, and verify smooth suspension operation. See
page 167.
Steering
1. On level ground, straddle the motorcycle and bring it to the fully upright position. Turn
the handlebars from stop to stop. The action should be smooth, but not loose.
2. Make sure wires, hoses and control cables do not interfere with smooth steering.
Rear Suspension
1. Check rear shock absorber movement and air pressure to ensure the correct amount of
suspension travel and ground clearance.
2. For air pressure adjustment information, see page 160 or refer to the suspension air pres-
sure label located in the left saddlebag near the air fitting.
WARNING! Inadequate ground clearance could result in components contacting the ground, causing
loss of control and serious injury or death. Always ensure ground clearance is at specification.
9922441.book Page 105 Monday, May 11, 2009 1:16 PM