Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 152)

148
Maint
e
na
nce
Maintenance
Engine Oil / Filter Change
10. Start the engine and allow it to idle for several min-
utes. Stop the engine.
NOTICE: After an oil change, the low oil pressure indicator
remains illuminated longer than usual before going
out. Revving the engine while the low oil pressure
indicator is illuminated can damage the engine.
11. Stop the engine. Check for leaks around the drain plug
and oil filter.
12. Check the oil level and adjust if needed.
13. Recycle the used oil and filter properly.
Engine Oil Capacity at Oil Change
(including filter)
4.5 qt. (4.25 liter)
(approximately)
Engine Oil Capacity at Oil Change
(not including filter)
4.0 qt. (3.8 liter)
(approximately)
1 qt. (.9 l)
(approximately)
Oil Check/Fill
08 Maintenance.fm Page 148 Monday, May 11, 2009 2:03 PM