Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 233)

229
Clea
ning/S
tora
g
e
Cleaning and Storage
Washing the Motorcycle
2. Rinse off as much dirt and mud as possible with water running at low pressure. Use as
little water as possible when washing near the air cleaner or the exhaust pipe openings.
Dry these components thoroughly before using the motorcycle.
3. Clean the front fork tubes thoroughly to reduce fork seal wear and leakage.
4. After washing, remove the rubber bands and plastic bags from the exhaust pipes. Start
the engine and let it idle for a few minutes. Make sure the brakes are functioning prop-
erly before riding.
9922441.book Page 229 Monday, May 11, 2009 1:16 PM