Polaris 2015 INDIAN Scout - Manual (Page 91)

89
Maintenance
Electrical Precautions
Be aware of the following precautions regarding the
electrical system to avoid disruption of electrical signals
and possible system malfunction.
• DO use ONLY genuine INDIAN MOTORCYCLE parts and
accessories designed for your model, and follow the
instructions provided.
• DO use the accessory power jack provided (if equipped).
• If it is necessary to provide power to an item that does not
use one of the previously mentioned power jacks, connect
to the “hot” side of the starter solenoid with an inline fuse,
and connect the ground wire to the chassis ground
located at the left rear section of the frame under the seat.
• DO NOT splice or cut any wires.
• DO NOT tap in to any power or ground on the motorcycle
unless specifically directed to do so by the INDIAN
MOTORCYCLE instructions that come with the kit.
• DO NOT back-probe electrical connectors on the vehicle
unless directed to do so by the INDIAN MOTORCYCLE
Service Manual.
• DO NOT power any accessories from the diagnostic
connector.