Polaris 2015 INDIAN Scout - Manual (Page 64)

62
Maintenance
Fuel Tank Removal
Please read the entire removal and reinstallaton procedure
before beginning. Do not attempt to remove and install the
fuel tank if you’re not comfortable with this procedure.
Please see your dealer.
A special fuel tank fitting plug tool
is required for this procedure.
Please see your dealer to obtain
this tool.
Tool: PV-50567
Before beginning, be prepared to place the fuel tank in a
secure location to avoid scratching the finish and to catch
any fuel that may leak or drip from disconnected hoses or
fittings.
1. Remove the seat. See page 82.
2. Lift the rear of the fuel tank filler pad to access the fuel
tank bolts.
3. Remove the four (4) rear fuel tank bolts. Set hardware
aside for reassembly.
4. Locate the rubber elbow and the straight rubber
coupler exiting the rear of the tank mounting bracket.
5. Gently pull the elbow
free of the tube to
disconnect the fuel
tank vent line.
6. Gently pull the
straight rubber
coupler free of the
tube to disconnect
the fuel cap recess
drain line.
7. Place the handlebars
in the straight ahead
position. Cover the
front of the fuel tank
with a protective
cloth to prevent
contact with the
instrument cluster,
which could cause damage.
8. Lift and support the rear of the tank approximately two
inches (5 cm).
PV-50567
Filler Pad Step 3
Step 5
Step 6
(California Models)
Step 5
Step 6