Polaris 2015 INDIAN Scout - Manual (Page 85)

83
Maintenance
Headlight Aim Inspection
On high beam, the center of highest intensity
(appearing as a diamond shape) should be 7.5 in. (19
cm) lower than the headlamp bulb and centered straight
ahead at 25 feet (7.6 m).
1. Verify that tire pressure is at specification. See page
81.
2. Verify that rear suspension ride height (preload) is
at specification. See page 68.
3. Position the motorcycle on a level surface with the
headlight 25 feet (7.6 m) from a wall.
4. With the operator and passenger (if applicable) on
board, bring the motorcycle to the fully upright
position.
5. Start the engine and switch the headlamp to high
beam. Observe the headlight aim on the wall.
6. Make any necessary adjustments to headlight aim.
See page 84.
25 ft. (7.6 m)
Headlamp bulb
7.5 in. (19 cm)
center height