Polaris 2015 INDIAN Scout - Manual (Page 56)

54
Maintenance
Proper maintenance assures the highest level of safety,
durability and dependability for your motorcycle. Break-in
maintenance is required to ensure warranty coverage and
proper emissions system operation.
• Perform the break-in maintenance procedures when the
motorcycle’s odometer registers 500 miles (800 km).
Please see your authorized dealer for this service.
• Perform the recommended periodic maintenance at the
intervals specified in the periodic maintenance table
beginning on page 56.
Road Tests
Before returning the motorcycle to regular use after
performing service, road test it in a safe environment. Pay
special attention to the proper fit and operation of all
serviced components. Make any corrections or additional
adjustments necessary to ensure safe vehicle performance.
Break-In Maintenance
Perform the break-in maintenance procedures when the
motorcycle’s odometer registers 500 miles (800 km). Please
see your authorized dealer for this service.
Performing the break-in maintenance will help ensure
optimum engine performance for the entire service life of
the engine. Your dealer will change engine oil, inspect all
fluids and serviceable components, ensure that all fasteners
are tightened and make other adjustments as needed.
Major Maintenance
Major repairs typically require technical skills and specially
designed tools. Emission system service requires special
tools and training and should be performed by your dealer.
See the INDIAN MOTORCYCLE Service Manual or an
authorized INDIAN MOTORCYCLE dealer.