Polaris 2015 INDIAN Scout - Manual (Page 76)

74
Maintenance
Mechanical Clutch Lever Lubrication
1. Remove the clutch
lever pivot nut and
screw. Disconnect
the clutch cable
from the clutch
lever.
2. Remove any old
grease and dirt from
the lever and
housing. Lubricate
the clutch lever and
pivot screw with
moly assembly
grease or all-purpose grease.
3. Reconnect the clutch cable. Hold the screw down and
tighten the nut.
Torque: 96 in-lbs (10.8 Nm)
4. Adjust clutch lever freeplay. See page 73.
5. Tighten the adjuster nut and slide the protective cover
over the adjuster.
Mechanical Clutch Cable Lubrication
Lubricate control cable barrel ends at the intervals
recommended in the periodic maintenance table beginning
on page 56.
NOTICE: The clutch cable is factory-lubricated. Additional
lubrication could be detrimental to cable performance.
Replace the clutch cable assembly if binding or sticking
occurs. DO NOT lubricate between the cable and sheath.
Verify proper routing and smooth movement. Inspect for
damage to the external casing, and inspect exposed cable
wire for fraying, kinks or corrosion. Replace any damaged,
sticky or sluggish cable.
1. Disconnect the cable at
the clutch lever and at the
primary cover.
2. Lubricate the barrel ends
with all-purpose grease.
3. Reconnect the cable and
adjust freeplay as
needed.
Clutch
Cable
Pivot Nut
Pivot Screw
Barrel
End