Polaris 2015 INDIAN Scout - Manual (Page 87)

85
Maintenance
Headlight Lamp Replacement
1. Remove the headlight retaining screw.
2. Lift the headlight upward and remove it from the base.
3. Disconnect the wire harness.
4. Remove the rubber boot from the rear of the headlight.
5. Squeeze the bulb retainer and move it away from the
bulb. Remove the bulb.
Tip: Avoid touching a halogen lamp with bare fingers. Oil from your
skin leaves a residue, causing a hot spot that will shorten the
life of the lamp. If a lamp is touched, clean it thoroughly with
denatured alcohol.
6. Install the new bulb and secure the retainer.
7. Reinstall the rubber boot, making sure it seals around
the bulb and headlight.
8. Connect the wire harness.
9. Reinstall the headlight to the base and tighten the
screw.
Torque: 36 in-lbs (4.1 Nm)
1. Retaining Screw 2. Remove Headlight
5. Release Retainer
3. Wire Harness
6. New Bulb