Polaris 2015 INDIAN Scout - Manual (Page 25)

23
Instruments, Features and Controls
Switches
Symbol Switch Description
Hazard Warning
Flashers Switch
The hazard warning flashers switch activates and cancels the hazard warning flashers. See page 24.
High/Low Headlight
Beam Switch
The high/low headlight beam switch toggles the headlight between high beam and low beam.
See page 25.
Horn Switch To sound the horn, press the horn switch.
Turn Signal Switch Move the switch to the left to activate the left turn signals. Move the switch to the right to activate the right
turn signals. A signal will deactivate automatically when speed or distance reach predetermined levels.
To cancel a signal manually, move the switch to the center position and push it inward.
Momentary Feature: Move the turn signal switch left or right and hold it in that position for at least one second.
The momentary feature will activate and the signal will then cancel when the switch is released.
Tip: If a bulb fails, the lamp flashes at more than twice the normal rate.
Stop/Run Switch Press the bottom of the switch (RUN) to allow the engine to start and run. Press the top of the switch (STOP)
to stop the engine. See page 24.
Starter Switch Use the starter switch to start the engine. The engine stop/run switch must be in the RUN position. See
page 25.