Polaris 2015 INDIAN Scout - Manual (Page 66)

64
Maintenance
Fuel Tank Installation
1. Place the handlebars in the straight ahead position.
Cover the front of the fuel tank with a protective cloth to
prevent damage.
2. Make sure the front isolators are installed to the frame.
Apply alcohol, soapy water or rubber lubricant to the
isolators and to the sides of the air box seal to ease tank
installation.
3. Using care to avoid
damage to the fuel tank
fitting and special tool,
lower the fuel tank onto
the frame of the
motorcycle. Slide the
tank forward to make
sure it’s fully seated on
the isolators.
4. Pivot the rear of the
tank upward to access
the tank bottom.
Support the rear of the
tank in this position.
5. Remove the plug tool from the fuel pump fitting.
6. Reconnect the fuel
supply line connector to
the fuel pump. Make
sure you hear a click to
indicate proper
engagement. Test the
connection by pulling
the fuel line lightly.
7. Connect the fuel pump
harness electrical
connector. Make sure
you hear a click to indicate proper engagement.
8. Verify that the fuel line is correctly routed and secured.
Step 3
Step 7
Step 6