Polaris 2015 INDIAN Scout - Manual (Page 30)

28
Instruments, Features and Controls
Instrument Cluster
Multi-Function Display (MFD)
Display Units (Standard/Metric)
The display can be changed to display either standard or
metric units of measurement.
1. Turn the ignition off.
2. Wait 10 seconds.
3. Press and hold the MODE button while turning the key to
the ON or PARK position.
4. When the display flashes the distance setting, tap the
MODE button to advance to the desired setting.
5. Press and hold the MODE button to save the setting and
advance to the next display option.
6. Repeat the procedure to change remaining display
settings.
Clock
Tip: The clock must be reset any time the battery has been
disconnected or discharged.
1. Use the MODE button to toggle to the odometer display.
2. Press and hold the MODE button until the hour segment
flashes. Release the switch.
3. With the segment flashing, tap the MODE button to
advance to the desired setting.
4. Press and hold the MODE button until the next segment
flashes. Release the switch.
5. Repeat steps 3-4 twice to set the 10-minute and 1-minute
segments. After completing the 1-minute segment, step
4 will save the new settings and exit the clock mode.
Standard
Display
Metric Display
Distance Miles Kilometers
Fuel U.S. Gallons I = Imperial
Gallons
Liter = Liters
Temperature Fahrenheit Celsius
Time 12-Hour Clock 24-Hour Clock