Grass Valley PVTV NEWS Rev.4.02 - Manual (Page 66)

62 STUDIO NEWS
Creating a Transition Macro
1.
Click the
NEW button on
the toolbar.
2.
Holding down the left mouse button,
drag and drop desired commands onto the
Transition Macro Timeline.
3.
After dragging all necessary macro
commands, select SAVE and follow the
specified directions.
When the NEW button on the toolbar is selected, only the timeline is cleared and replaced with a
new screen. All other settings on the GUIs remain the same.
The Macro properties are set using the property pages which are accessed after dragging the
Macro Commands onto the timeline, by using presets as the Macro Commands, or by importing
.TMEs.
If working with presets, it is possible to click, drag and drop preset macro controls from the speci-
fied areas on the right control GUI. To do so, set all preset properties as described earlier in this
manual, right-click on the desired preset button and drag it onto the timeline. Once on the timeline,
properties can be viewed/edited by double-clicking the desired preset Macro Command. The property
page will appear.