Grass Valley PVTV NEWS Rev.4.02 - Manual (Page 11)

7 STUDIO NEWS
Camera Preset Hotkeys
Camera Preset Hotkeys provide quick recall for preset camera position and autoTRACK™ views.
Each CameraMan® camera can store up to 125 presets in memory through use of the SHOT
Director™. A total of 28 presets can be assigned to the 28 hotkeys in the Preset Hotkeys window
(shown below). Once assigned, these 28 preset hotkeys can recall camera locations and automatic
camera tracking settings.
To assign a hotkey:
1
. Select the Hotkey Config. Button.
2
. Select the desired Preset Hotkey
button. When selected the button
will illuminate. The Preset Setup
dialog box will appear.
3
. Toggle the Preset button ON to
recall camera locations OR toggle the
TrackView button ON to recall
autoTRACK presets, including tracking
window and frame offset specifications.
4
. Select the camera
that contains the preset
to be linked to a hotkey.
5
. Select the preset number
that corresponds to the preset
in the specified camera. This is
the preset that will be stored in
the selected hotkey.
6
. Type a name describing the
preset. This name will appear
on the selected preset hotkey
button.
7.
Select OK.
Select Preview after selecting a preset number to view the preset and make sure it is the one
desired before linking it to a hotkey.
The look of the PRESET HOTKEY SETUP dialog box will vary depending on the type of camera
being controlled by STUDIO. Possible camera types include CameraMan, Vinten and/or Radamec.
The Radamec BCP (Basic Control Panel) stores up to 12 presets. The Radamec SCP (Shot Control
Panel) stores up to 600 presets.