Grass Valley LDK 8000 v.2.0 - Manual (Page 42)

v2.0
LDK 8000 User’s Guide | Operating instructions 5-2
5.2 System Menu
The camera is operated via the viewfinder text display and the control system menu switches.
The systems menu is viewed in the viewfinder and navigated by means of the Rotary control
and the Select button which are both located at the front of the camera.
Figure 5-1. Menu control buttons
The functions of the camera are grouped into menus and sub-menus. There are seven
different menus that are listed in the main menu as follows:
Each of these menus gives you access to a particular group of functions. Spend some time
using the controls and menus to discover the various functions. You will quickly learn to
operate the camera intuitively.
☞
Note
Some of the menu items may not appear if the user level is not set to 3.
5.2.1 Entering the System menu
Press the Select button after the camera is switched on, the message Menu off appears in the
viewfinder. Press the Select button again while this text is showing, the
MAIN menu appears
in the viewfinder.
VF >>
Lens >>
Video >>
Install >>
Files >>
Security >>
Diagnostics >>
VTR start
Audio Level Select
V
shift
Clean
scan
Exp.
Time
White
Bal.
Menu
select button
Menu rotary
control