Grass Valley K2 Summit 3G v.8.0 User Manual
Page 83
3. Once the startup sequence begins, observe the progression of behaviors as listed in the following
table. These are the behaviors you should expect for a normally operating K2 Summit system.
If you observe behaviors other than those listed, refer to the indicated troubleshooting topics to
identify problems.
NOTE: You can press the Pause/Break key on the keyboard to keep startup text on the screen
for longer viewing.
If not, refer to the following:
This behavior should occur…
At about
this time…
on
page 84
Pressing the standby button starts the K2 Summit
system.
—
on page
87
Power on LED goes on and stays on.
0 seconds
on
page 84
Service LED stays off.
page 86
Front bezel assembly and processor fan start.
on page 85
System BIOS screen appears.
10
seconds
—
Grass Valley logo screen appears.
35
seconds
on page 85
Windows logon screen appears.
70
seconds
Logon to Windows to continue the startup sequence.
After Windows logon:
If not, refer to the following:
This behavior should occur…
At about
this time…
on
page 86
Grass Valley logo desktop appears.
0 seconds
Service LED goes on for a few seconds, then off.
5 seconds
on page 85,
86
Desktop icons, startbar, and AppCenter logon
box appear.
20
seconds
Logon to AppCenter to continue the startup sequence.
After AppCenter logon:
If not, refer to the following:
This behavior should occur…
At about
this time…
on
page 86
System Startup messages appear.
0 seconds
02 February 2012
K2 Summit 3G Production Client Service Manual
83
Troubleshooting problems