Grass Valley K2 Summit 3G v.8.0 - Manual (Page 63)

Services on an shared storage K2 Summit system
When a shared storage (SAN) K2 Summit system is operating normally, in the Services control
panel services appear as follows:
Comments Startup Type Status Service
— Automatic Started CvfsPM
2
Depends on Status Server service. Automatic Started Grass Valley AppService
Used to consolidate unused space
(extents) at the end of proxy clips
on an SNFS file system. Does not
apply to non-SNFS file systems. Manual Started Grass Valley Extent Manager Service
Intentionally not started by Status
Server service on shared storage
models. Transfers go to K2 Media
Server, not K2 Summit system. Manual — Grass Valley FTP Daemon
— Automatic Started Grass Valley Host File Service
Provides access to live streaming
configuration (SDP) files. Manual Started Grass Valley HTTP File Server
Needed on shared storage K2
Summit system. Automatic Started Grass Valley K2 Config
— Manual — Grass Valley MegaRaid Server
— Manual — Grass Valley MetaDataService
— Automatic Started Grass Valley RTS Config Service
Allows Macintosh systems to
remotely check out a license. Manual — Grass Valley SabretoothWS
— Automatic Started Grass Valley Storage Utility Host
Provides communication with
K2Config. Required on any device
configured by K2Config. Also
provides communication with
STRATUS configuration tools. Automatic Started Grass Valley STRATUS K2
Configuration Service
At startup the Status Server service
makes sure the following services
are started:-AMP TCP
Service-AppService Automatic Started Grass Valley System Status Server
Needed on shared storage K2
Summit system. Automatic Started Microsoft iSCSI Initiator Service
— Automatic Started ProductFrame Discovery Agent
Service
2
With SNFS version 3.5, this is the only service. Previous versions had StorNext File System service and StorNext File
System RPC Port Mapper service.
02 February 2012 K2 Summit 3G Production Client Service Manual 63
Service procedures