Grass Valley K2 FCP Connect v.2.0.0 - Manual (Page 42)

5. For Location , click the browse arrow to navigate to and select the HotBin that is
configured to import the sequence to the bin that Aurora Playout monitors.
6. For Format , select the format in which the sequences are exported to K2 storage.
7. Click Add to add the location as a playout destination.
8. Repeat these steps to add multiple locations.
9. Select an item in the list and use the Modify or Delete buttons to manage the list.
10. For GV SimpleDB Server IP Address , enter the IP address of the Aurora Playout
server on which GV connect accesses placeholders/rundowns.
11. If you are using XMOS, do the following:
a) Next to GV XMOS Rundowns/Script Path: , select Active .
b) Browse to and select the directory where scripts are stored.
c) For
GV Mos Id , enter the MOS protocol ID that GV Connect uses to access
placeholders/rundowns.
Connecting via SAMBA/CIFS
Use this method to connect to the SNFS volume via CIFS. Once the Macintosh
computer has been bound to a domain it can then connect to any domain controlled,
shared volume via SAMBA. If connecting via SAMBA, XSan software does not need
to be installed or configured.
1. On the Macintosh computer open the Finder program and at the top menu click Go
| Connect to Server .
The Connect to Server dialog box opens.
2. In the Server Address field, type smb:// , then type the IP or DNS name of the
server to which you are connecting, slash, then type the volume name.
42 K2 FCP Connect Installation Manual 22 October 2010
Installing and configuring K2 FCP Connect