Grass Valley K2 FCP Connect v.2.0.0 - Manual (Page 33)

NOTE: If your system has a large number of iSCSI clients, you are prompted
to restart the K2 Media Server when you configure clients and cross the
following thresholds: 64 clients; 80 clients; 96 clients.
3. Enter the network name for the client device, as currently configured on the device.
If you have multiple client devices to configure, you should configure your
highest bandwidth devices first, as this ensures load balancing is correct.
4. For Storage Access, leave iSCSI selected.
5. Click Next .
The Xsan Licensing Information page opens.
6. Enter information exactly as received from Apple with your Xsan license. If you
did not receive information for a field on this page, leave the field blank.
For example, if a one-seat license, enter only the Serial number and leave the
Registered To and Organization fields blank.
7. Click Next .
The Software Configuration page opens.
This page checks the client device for required software.
22 October 2010 K2 FCP Connect Installation Manual 33
Installing and configuring K2 FCP Connect