Grass Valley K2 FCP Connect v.2.0.0 - Manual (Page 38)

e) Verify that there is a "+" next the text file, plus a list of permissions below. If
this is true then cross-platform ACLs are enabled.
f) Open the Finder, go to the default volume and try to edit the text file. This
should fail as the file should not be writeable.
g) In the Finder, go to the folder you created earlier in this procedure and create
a text file in the folder. This operation should be successful.
h) Log out and then log back in as userB.
i) In the Finder, go to the folder you created earlier in this procedure and try to
create a text file in the folder. This operation should fail.
Verify bandwidth of connection to K2 storage
Before starting this task, procure the Xbench software. You can download it from
http://www.xbench.com.
1. Install Xbench on the Macintosh system.
2. Open Xbench.
38 K2 FCP Connect Installation Manual 22 October 2010
Installing and configuring K2 FCP Connect