Grass Valley K2 FCP Connect v.2.0.0 - Manual (Page 24)

• If Fibre Channel access, connect the Fibre Channel port to the K2 SAN Fibre
Channel switch or to a Fibre Channel port on the K2 RAID controller.
Configure Macintosh systems for control network
Configure each Macintosh system as follows:
1. Open System Preferences, Network settings.
2. Set Ethernet 1 to configure manually (static IP).
3. Configure IP address, subnet mask, and other settings as required for the control
network.
Configure Macintosh systems for Active Directory Domain
If desired, MAC OS X can be configured to use Active Directory (AD) resources such
as users and groups. Once a computer is bound to an AD domain, users belonging to
that domain may login to the Macintosh system at the main login prompt. If you do
this task, you must also enable Access Control Lists on the K2 storage you access,
either the K2 Media Server (FSM) for SAN access or the stand-alone K2 system.
1. Open System Preferences and click Accounts .
2. If the Lock icon is locked, unlock it by clicking it and entering the administrator
name and password.
3. Click Login Options , then click Join or Edit . If you see an Edit button, your computer
has at least one connection to a directory server.
24 K2 FCP Connect Installation Manual 22 October 2010
Installing and configuring K2 FCP Connect