Grass Valley Fiber Media Converter - Manual (Page 43)

Media Converters — Instruction Manual 43
Specifications
Table 5. MVMC Transmitter Specifications
Parameter Value
MVMC-T-H-2 Transmitter
Recommended Operating Conditions
Operating case temperature 0 º C (minimum), +70 º C (maximum)
Supply voltage +4.5 VDC (minimum), +7 VDC (maximum)
Power dissipation 1.75 W
Baud rate
19.4 Mb/s (minimum), 1485 Mb/s (maximum)
19.4 /143/177/270/360/540/1485 Mb/s
Electrical
Input signal SMPTE 292M/259M/297M/305M/310M, mV p-p
Input impedance 75 ohms
1
1 Equalized for 140m Belden [email protected] Gb/s and 350m Belden 1694A@270 Mb/s.
Return loss 15 dB
Propagation delay 1.5 ns
Optical (1310nm FP Singlemode Laser)
Optical center 1290nm (minimum), 1310nm (typical), 1330nm (maximum)
Optical transmit power - 9 dBm (minimum), - 3 dBm (maximum) average @ 1310 nm
Extinction ratio 9 dB (P1/P0)
Spectral width 4 nm (RMS)
Total jitter
120 ps (typical), 135 ps (maximum)
(measured with color bar test signal @ 1.485 Gb/s)
740 ps (measured with color bar test signal @ 143/177/270/360 Mb/s)
Output rise time
80 ps (typical), 120 ps (maximum)
(20-80%: measured unfiltered @ 143/177/270/360/1485 Mb/s)
Output fall time
240 ps (typical), 270 ps (maximum)
(20-80%: measured unfiltered @ 143/177/270/360/1485 Mb/s)