Grass Valley Fiber Media Converter - Manual (Page 36)

36 Media Converters — Instruction Manual
Installation and Operation
Power Supply Indicator LEDS
The two LEDs labeled P1 and P2 ( Figure 26 ) indicate the status of the
VMCR dual power supplies. A properly functioning power supply will
light green. It there is a fault in either power supply, the corresponding LED
will light red.
Temperature Indicator LED
The TEMP LED ( Figure 26 ) indicates the frame internal temperature status.
A red LED indicates internal temperature has exceeded factory set temper-
ature levels caused by failure of cooling fan or airflow blockage). A green
LED indicates normal operation.
Figure 26. Power and Temperature LEDs
ID Button