Grass Valley Fiber Media Converter - Manual (Page 23)

Media Converters — Instruction Manual 23
Installation and Operation
Mini Video Media Converters (MVMCs)
The mini BNC to Fiber video media converters (MVMCs) can be attached
directly to any HD video device with a standard BNC connector. The
MVMC devices can receive or transmit an HD signal depending on the
MVMC model used.
MVMC receive devices are identified on the case by a label with RX and an
arrow indicating direction in a blue field. The MVMC device shown in
Figure 8 is a MVMC-R-H-2 (HD receiver, 1310nm, single mode). This unit
inputs an optical signal on the optical connector and transmits an electrical
signal out the BNC connector. The signal is not reclocked in these devices.
The protective dust cover is shown installed on the optical connector.
Figure 8. Mini Video Media Converter Transmitter
MVMC transmitters have a TX on the label and an arrow showing direction
of the output signal in a red field as shown in
Figure 7 . These units receive
an electrical signal on the BNC connector and outputs an optical signal out
the optical connector.
Figure 9. Mini Video Media Converter Receiver
Optical connector dust cover