Grass Valley Fiber Media Converter - Manual (Page 27)

Media Converters — Instruction Manual 27
Installation and Operation
Rack Mounting the VMCR-18-R
The VMCR-18-R is shipped with a short front bracket and an extended
length rear bracket mounted to the unit (
Figure 14 ). This slide version rack
mount should accommodate most video racks with some adjustments.
Note Another long rear bracket is included with the additional parts that accom-
pany this frame. It can be used in place of either the front or rear bracket as
described in the rack mount instruction pamphlet provided with the addi-
tional parts.
Figure 14. Rack Mount Factory Installed
The following additional parts come in a separate bag shipped with every
VMCR-18-R frame (
Figure 15 ):
• Installation instruction pamphlet for rack mounting the frame
• Two long rear brackets (used for other applications)
• Two #10-32 three-position bar nuts (for use on rear rack mount)
• Eight #1-32x.50”truss head Phillips screws (for standard video racks)
• Two #8-32x0.25 pan head slotted screws
• Four guide pins
• 18 self-adhesive fiber cable guides
• Four self-adhesive multi-fiber brackets
Figure 15. Additional Parts Shipped
Short front bracket
Extended length
rear bracket
with bar nut
(removable)
Front knob
Long rear bracket (2X)
Truss head screws (8X)
Bar nuts (2X)
Pan head slotted screws (2X) Fiber management
saddles (18X)
Multi-fiber
brackets (4X)
Guide pins (4X)