Grass Valley Aurora Transfer v.6.0b - Manual (Page 53)

September 11, 2006 Aurora Transfer Instruction Manual 53
Transferring media assets
Select or de-select columns and move them up or down the list to create the
arrangement of columns you desire.
Transferring media assets
Use the following procedures to control the movement of media between managed
devices.
• “Initiating a transfer”
• “Initiating multiple transfers”
• “Using the Transfer Information window”
• “Managing transfers”
• “Viewing completed transfers”
Initiating a transfer
To transfer media assets from one location to another, do the following:
1. Verify or change the currently configured transfer options as follows:
a. Click Tools | Configuration . The Configuration dialog box opens.
b. In the Transfer Options area, configure the Transfer Initiator field if desired.
This sets the user name attributed as the initiator of transfers.
c. In the Transfer Options area, configure the Auto Rename field if desired. When
set to True it enables the Transfer application to automatically rename a
transferred asset if necessary.
Also refer to “Configuring the Transfer application” on page 62 .
2. Select the source media asset or assets you intend to transfer in one of the following
ways:
• In either the left side or the right side view of the MediaFrame network, select
the source media asset or assets.