Grass Valley Aurora Transfer v.6.0b - Manual (Page 14)

14 Aurora Transfer Instruction Manual September 11, 2006
Chapter 2 Installing the Aurora Transfer system
Rack-mount the Transfer Server
Follow the instructions you received with the rack-mount hardware to install the
Transfer Server. One rack-unit spacing is recommended between components for
ventilation.
About the Transfer Server
The central hardware component of the Aurora Transfer system is the Aurora Transfer
server. It hosts the following software components:
• A web server, which delivers the Transfer system configuration pages
• The MediaFrame database and Managed Device Interface services for holding and
relating assets in the system.
The server connects via the network to source devices, destination devices, and PCs
running the Transfer application. Refer to the system diagrams in
Chapter 1, System
Overview .
Cable the Transfer Server
Cable as illustrated and as follows:
• Connect Gigabit port 1 to the network.
Gigabit port 1
VGA cable
to KVM Keyboard/mouse
port to pigtail
to KVM Power Gigabit port 2