Grass Valley Aurora Transfer v.6.0b - Manual (Page 43)

September 11, 2006 Aurora Transfer Instruction Manual 43
Configure Archive
Configure DIVA MDI
Open this page locally on the machine that hosts the DIVA MDI software component.
This page tells the DIVA MDI where to look for FTP transfer of high-res media
assets. In this example settings are shown for archiving to/from a AuroraShare NAS.
For AuroraShare NAS systems, archive transfers are handled by a single FTP server.
http://localhost:280 Managed Devices DIVA MDI Open this page locally from the DIVA MDI host.
Name of the DIVA MDI.
Enter 9122 . See “Ports and services mapping” on page 20 .
Name of IP address of the DIVArchive machine.
The port at which DIVA Manager listens for any active connection. By default
this port is set to 9000.
Specify the name of the disk arrays that are currently configured with the
DIVA system.
a
a.
An array designates a collection of disks designated by
their name as they are declared in the DIVArchive
configuration.
The timeout value that controls any communication with the DIVA manager.
Default value is set to 180 seconds.
Saves changes. Changes are lost if you leave the configuration page without
updating.
The following settings define FTP for archive sources/destinations.
Load balancing settings are disabled as only Round Robin is supported.
Select the News MDI name.
Enter the hostname of the machine hosting the News FTP service.
Adds a FTP server as a source/destination for archive operations.
Currently added FTP servers.
Deletes the currently selected device.
Always click Update… buttons after making changes