Grass Valley Aurora Transfer v.6.0b - Manual (Page 44)

44 Aurora Transfer Instruction Manual September 11, 2006
Chapter 3 Configuring the Aurora Transfer System
Configure Archive Services
.
This page tells the Archive MDI where to place high-res assets as they are restored
from the archive device.
When you select “Enable Mirrored Destination…”, you can then enter the MDI and
location for the mirrored high-res system. This allows you to define the pair of
mirrored systems as a single restore location. When this single location is selected in
the Aurora Transfer application, clips are restored or deleted on both high-res systems
simultaneously.
Add Aurora Transfer clients
Select one or more PCs on which to install the Transfer application. The requirements
for a Transfer client PC are as follows:
• Windows XP
• Pentium 4 processor
• Microsoft .NET Framework 1.1
• Network access to the Aurora Transfer server
To install the Transfer application, do the following:
1. Insert the Aurora Transfer Application CD.
2. Open setup.exe.
3. Follow on-screen instructions, clicking Next and Yes .
http://root-nb-svr-n:280
Aurora Transfer
Application Archive Services
Enter name for restore location, for display in the Aurora Transfer
application.
Select the MDI for the high-res system that gets the restored clips.
Select a location on the high-res system that gets the restored clips.
a
a. Profile location lists are automatically populated by
reading bins and volumes, as in Media Manager, from the
Profile whose MDI is selected from the field above.
Select if restoring to mirrored high-res systems. This opens the following fields
for mirrored restore operations.
Select the MDI for the mirrored system that gets the restored clips.
Select a location on the mirrored system that gets the restored clips.
Click to add as a restore location.
Lists currently added restore locations.
Click to remove the currently selected restore location.
Restart the Aurora Transfer application to put changes into effect.