Grass Valley Aurora Transfer v.6.0b - Manual (Page 42)

42 Aurora Transfer Instruction Manual September 11, 2006
Chapter 3 Configuring the Aurora Transfer System
Configure FlashNet MDI
Open this page locally on the machine that hosts the FlashNet MDI software
component.
This page tells the FlashNet MDI where to look for FTP transfer of high-res material.
In this example settings are shown for archiving to/from a AuroraShare NAS. For
AuroraShare NAS systems, archive transfers are handled by a single FTP server.
http://localhost:280 Managed Devices FlashNet MDI Open this page locally from the FlashNet MDI host.
The name of the FlashNet MDI.
Enter 9124 . See “Ports and services mapping” on page 20 .
Name or IP address of the FlashNet machine.
Saves changes. Changes are lost if you leave the configuration page without
updating.
The following settings define FTP for archive sources/destinations.
Load balancing settings are disabled as only Round Robin is supported.
Select the MDI name for the News MDI.
Enter the hostname of the machine hosting the News FTP service.
Adds a FTP server as a source/destination for archive operations.
Currently added FTP servers.
Deletes the currently selected device.
Always click Update… buttons after making changes