Grass Valley Aurora Transfer v.6.0b User Manual
Page 45
September 11, 2006
Aurora Transfer Instruction Manual
45
Add Aurora Transfer clients
4. When you arrive at the Configuration Information page, enter the IP address or
name of the Transfer Server. In the Transfer system, the ASK software component
is hosted by the Transfer Server. If you have not yet installed and configured the
Transfer Server, you can enter any text for now to enable the Next button. You can
configure the ASK host name in the Transfer application later.
5. Select the user credentials as follows:
• Administrator — With this option, all operations are available in the Transfer
application.
• Browse User Only — With this option, the following operations are not
available in the Transfer application:
- Delete
- Rename
- Create (bin)
- Cut/Paste.
6. Click
Next
and
Finish
to complete the installation wizard.
7. Find the Transfer application shortcut
on the Windows desktop.
“Using the Transfer application”
for operational procedures.
Transfer