Grass Valley 8985PRC v.1.1.0 - Manual (Page 40)

40 8985PRC — Instruction Manual
Configuration
User Settings Web Page
Use
this
link
The User Settings web page ( Figure 17 ) provides a save/load function for
configuration files and a way to recall factory defaults parameters and
signal names for the entire module.
Recall Factory Defaults and Names
Use the two button at the bottom of the web page to do the following:
• Set Factory Defaults – select the Set Factory Defaults button to recall factory
settings to the module. Defaults for all module parameters are listed in
Table 6 on page 53 .
• Set Factory Names – select the Set Factory Names button to recall factory
signal names to the module. Defaults for all signal names are displayed
on the I/O Config web page shown in
Figure 11 on page 32 .
Figure 17. User Settings Web Page