Grass Valley 8985PRC v.1.1.0 - Manual (Page 21)

8985PRC — Instruction Manual 21
Configuration
Configuration
The 8985PRC module can only be configured remotely using the 8900NET
network interface GUI or a networked Newton control panel. An 8900NET
module running software version 4.3.0 is required. (See
Software Require-
ments on page 10 for instructions for upgrading this software.)
Refer to the following sections for configuration instructions:
• Configuration Overview ( page 21 )
• Remote Control and Monitoring ( page 23 )
• Configuration Parameter Summary ( page 53 )
Operation of these control types is explained in detail in their respective
sections of this manual.
Configuration Overview
This section provides a brief overview of all parameters that can be config-
ured on the 8985PRC module. Use this section in conjunction with the spe-
cific configuration method instructions for each configuration type.
Table 6
on page 53 provides a summary in table format of all parameters and their
ranges, default values, and remote web page and Newton control panel
function names and locations for setting each value.
Video Input Selection
Set the type of input connection from a coaxial electrical input or, if an
optional SFP Fiber Optic submodule is installed, one of the fiber optic
inputs.
System Configuration
System configuration is required for the input type and line rate and allows
enabling of the colorbars test signal.
Split Screen Control
A Split Screen function can be enabled for comparing the unprocessed
input to the processed output. This function is very useful when using the
color correction or video processor controls. The Split Screen orientation
can be set vertically or horizontally and can be adjusted for the amount of
video to be displayed (10-90%). Interactive Split Screen controls are present
on the System Config, Video Processing, and Color Correction web pages.