Software updating – Grass Valley 8985PRC v.1.1.0 User Manual
Page 46
46
8985PRC — Instruction Manual
Software Updating
Frame Health Reports Link
Select the Frame Health Reports link to open the 8900NET module Frame
Alarm Reporting web page. This web page allows configuration of the
alarms and warnings that are reported to the external Frame Health Alarm
connector on the rear of the GeckoFlex frame.
LED Reports Link
Select the LED Reports link to open the 8900NET LED Reporting web page.
Normally, every module in the frame will report to the 8900NET module
any Fault, Signal Loss, Reference Loss, or Config Error conditions. These
conditions will be reflected by the status LEDs on the 8900NET module.
Using this web page, any of these conditions can be disabled from being
reported to the 8900NET module for each individual module in the frame.
SNMP Trap Reports Link
Select the SNMP Trap Reports link to open the 8900NET SNMP Reporting
web page. This link will only be present when SNMP Agent software has
been installed on the 8900NET module. This web page allows configura-
tion of which alarms and warnings that are reported to the SNMP manage-
ment software.
Refer to the 8900NET Instruction Manual for complete details on using the
8900NET web pages.
Software Updating
Software updating of the 8985PRC modules is done using the NetConfig
Networking Application PC option. This application is available free of
charge from the Grass Valley web site. Refer to the current 8985PRC Release
Notes for software updating instructions.
Software updating requires the presence of the 8900NET module running
software version 4.3.0. Refer to
Software Requirements on page 10
for
acquiring the latest version 8900NET software.
All modular product documentation can be found in PDF format on the
Grass Valley web site at this link: