Grass Valley 8985PRC v.1.1.0 - Manual (Page 19)

8985PRC — Instruction Manual 19
Power Up
Power Up
The front LED indicators and configuration switches are illustrated in
Figure 6 . Upon power-up, the green PWR LED should light and the yellow
CONF LED should illuminate for a few seconds for the duration of module
initialization. The on-board configuration switches are not used on this
module even though they may be present on the module.
Note When a media module is first plugged into a GeckoFlex frame, the 8900NET
module (if present) may report a momentary fault. This will clear once the
media module has booted up.
Operation Indicator LEDs
With factory default configuration and a valid input signal connected, the
green PWR and (
Figure 6 ) on the top side of the module front edge should
illuminate (refer to Table 2 on page 20 to see the possible operating indi-
cator combinations).
Figure 6. Front Panel LED Indicators