Grass Valley 8985PRC v.1.1.0 User Manual
Page 28
28
8985PRC — Instruction Manual
Configuration
Web Page Links
The web interface GUI provides the following links and web pages for the
8985PRC module (see links at left):
•
Status – reports input and output signal status, frame bus communica-
tion status, module status and information, warnings and errors
(
),
•
I/O Config – shows a graphic representation of inputs and outputs of
the module and allows naming of each input and enabling and dis-
abling of signal reporting (
),
•
Video Input – allows selection of the video input source and provides
the status of all sources, including fiber optic submodule option inputs
(
),
•
System Config – set input video rate and line standard, enable colorbars
test signal, and controls for the Split Screen functions (
),
•
Color Correction – provides RGB gain, offset and gamma correction
adjustments and controls for the Split Screen functions (
),
•
Video Proc – provides overall video processing for the HD or SD signal
and a control for Split Screen functions (
•
User Settings – allows recalling of factory defaults for all module
parameters or factory signal names, and provides a save/load configu-
ration file function (
•
Video Out – enable and disable the fiber optic outputs when a fiber
module is installed and set SD or HD horizontal video output delay
(
), and
•
Slot Config – provides Locate Module, Slot Identification, and Slot
Memory functions along with links to the 8900NET SNMP, LED
Reporting, and Frame Alarm configuration web pages (
).
A summary table of all module parameters including defaults, ranges, and
Newton Control panel controls is given in
.