Grass Valley 8950ADC User Manual

Page 26

8950ADC Instruction Manual

Configuration

Video and Black Levels

If required, Video and Black levels for each channel can be adjusted as
needed after the selected format defaults have been loaded.

Levels can be set in

Independent

mode (Y/G, Cb/B, and Cr/R individually)

or in

Locked

mode (all channels at once with any of the three controls). Use

the

Control Action

pulldown to select either

Independent

Locked

Make Level adjustments with the controls provided. You may use the
arrow controls or enter a number with the keyboard.

If you have made level changes, save these if desired with the Save User
Settings function (see

Horizontal delay, sync source, and vertical blanking are not changed by
this reset so these user adjustments are retained. This differs from the

Get

Factory Defaults

function which returns these values to factory calibration.

The Level web pages differ slightly between formats. The Black controls
will be labeled differently for the specific formats.