Grass Valley 8950ADC - Manual (Page 13)

8950ADC Instruction Manual 13
Configuration
Configuration
The 8950ADC can be configured locally using onboard switches or
remotely using the 8900NET network interface GUI or a networked control
panel.
Refer to the following sections for configuration instructions:
• Configuration Summary ( page 13 )
• Local Onboard Module Configuration ( page 18 )
• Remote Control and Monitoring ( page 20 )
Operation of these control types is explained in detail in their respective
sections of this manual.
Configuration Summary
This section provides a summary of all parameters that can be configured
on the 8950ADC module.
Table 4 on page 16 provides a summary in table
format of all parameters and their ranges, default values, and remote, local,
and control panel function names and locations for setting each value.
Format Selections
The 8950ADC converts any one of the following analog Color Difference or
GBR video signals to a SMPTE 259M (270 Mb/s) D1 serial component
digital signal:
• SMPTE
• GBR
• Beta (US/525)
• Beta (Japan/525)
• MII (US/525)
• MII (Japan/525)
• EBU N10 (625)
Once a format is selected, the default values for that format will be loaded
to the module. The overall factory default for the module is GBR.