Grass Valley 8950ADC - Manual (Page 23)

8950ADC Instruction Manual 23
Configuration
8950ADC Links and Web Pages
The 8900 GUI provides the following links and web pages for the 8950ADC
module (
Figure 8 ):
• Status – reports input and reference signal status and module informa-
tion (
page 24 ),
• Levels – select operating format for module and adjust video and black
levels (
page 25 ),
• Timing/Blanking – adjust horizontal timing, select SAV/EAV, sync
source, and vertical blanking width (
page 27 ),
• Standard Selections – select standard recognition method, add or
remove output video setup, and turn Kalypso 0:4:4 compressed chroma
key signal on or off (
page 28 ),
• User Settings – Save or recall user settings, select factory defaults
(
page 29 ),
• Slot Config – provides a Locate Module function and Slot Memory and
SNMP reporting status information (
page 30 ), and
• Software Update – provides information on software updating
(
page 32 ).
Figure 8. 8950ADC Web Page Links
Refer to Table 4 on page 16 for a summary in table format of all parameters
and their ranges, and default values.