Grass Valley 8949SVM-LOC - Manual (Page 34)

34 8949SVM-LOC/-UMD—Instruction Manual
Specifications
Table 3 gives the approximate amount of delay length relative to the input
format when the module Frame Rate control is set for Follow Input mode in
the Initial Settings control group.
Compatible frame type
GeckoFlex 8900FF/8900FFN (with fans)
(8900NET or Frame Monitor module not required for operation)
Power 8.5W (single slot) 3
1 Output modes are only available where supported by the monitor. 60Hz computer scan rates are often close
but not exactly equal to 60Hz. The 8949SVM adjusts line and vertical blanking to provide a 60Hz scan rate.
2 As the 8949SVM module does not communicate with the 8900NET (Net Card) module over the frame serial
bus, the configuration of tallies and UMD text on the 8949SVM-UMD module must be done by connecting an
external system supporting TSL protocol to the module’s Ethernet port. See
UMD Text and Tally Control on
page 37 .
3
When used in a frame with an 8900NET (Net Card) module, the Power Supply/Demand web page will report
5.5 Watts for any slot with an 8949SVM module installed. The 8949SVM does not communicate with the
8900NET module over the frame serial bus so the 8900NET assumes a default power demand of 5.5 Watts.
Table 3. Delay Length Relative to Input Format
Frame Rate Delay Length
625i/PAL 41ms
525i/NTSC 34ms
720p/23.98 84ms
720p/24 84ms
720p/25 81ms
720p/29.97 67ms
720p/30 67ms
720p/50 41ms
720p/59.94 34ms
720p/60 34ms
1080p/23.98 84ms
1080p/24 84ms
1080p/25 81ms
1080p/29.97 67ms
1080p/30 67ms
1080i/50 41ms
1080i/59.94 34ms
1080i/60 34ms
1080sf/23.98 43ms
1080sf/24 43ms
Table 2. 8949SVM Specifications
Parameter Value