Configuration with paddle switch controls, Of the module. refer to, Configuration with paddle – Grass Valley 8949SVM-LOC User Manual

Page 19: Configuration with

8949SVM-LOC/-UMD—Instruction Manual

Module Configuration and Monitoring

Configuration with Paddle Switch Controls

The front edge paddle switch controls are shown in

Figure 8

and described

in detail in

Table 1 on page 20

. Refer also to the

Configuration Example on

page 22

To use the paddle switch controls for configuring the module, do the fol-
lowing:

Press the

Menu

paddle switch control down to enter the local controls.

This will bring up the

Status

menu (or the UMD text on the -UMD

model) on the bottom of the monitor screen. Use this paddle switch
control to select

Status

, the first selection in the top level control groups.

Now use the

paddle switch control to scroll through the top level

control groups which will appear in this order:

Status (Read-Only)

Picture

Settings

Audio Setup

Control Settings

Initial Setup

. The different

configuration and status menus for each of these groups are described
in

Table 1 on page 20

When you reach the top level group containing the menus or status
items you need, press the

Select

paddle switch control up to enter this

group. The menus have abbreviated names as given in the table.

Now use the

and

Down

paddle switch controls to scroll through the

menu items in this group. When you reach the configuration or status
menu you need, press the

Select

paddle switch control up to enter this

menu.

Now you may use the

and

Down

paddle switch controls to scroll to

the configuration parameter desired. Press the

Select

paddle switch

control up to accept the setting. Some controls will become active
immediately, such as

Pattern

To set a parameter back to the default value, select the parameter in the
display then press the

Down

paddle switch control followed

momentarily by the

Menu

paddle switch control. Then release both

paddle switch controls.

Figure 8. Front Module Configuration Controls

Menu: Press paddle down to enter Local mode then access UMD display or
enter top level control groups.

Select: Press paddle up for to enter a top level control group or menu.

Up/Down: Once in a top level control group or menu after using Select,
use the Up and Down paddle to scroll through control groups or menu choices.

SW1

SW2

Down

Select

This manual is related to the following products:

8949SVM-UMD