Grass Valley 8949SVM-LOC - Manual (Page 20)

20 8949SVM-LOC/-UMD—Instruction Manual
Module Configuration and Monitoring
Table 1. 8949SVM Paddle Switch Configuration Table
Control Group Control Name Menu Name/Default Range/Options Description
Status
(Read-Only)
Input Standard Input See Table 2 on page 33 Reports current input standard.
Audio pairs present Audio 1 2 3 4 5 6 7 8
Reports audio pairs present in incoming video. No
audio pairs will be reported as – –.
For example, when only audio pairs 1 and 2 are
present, in the input video, the display will read:
1 2 – – – – – –.
Output Standard Output See Table 2 on page 33 Reports current output resolution.
Product Version Version 1.0 Reports current software version.
Current IP address IP 192.168.0.200 (default) Displays default or as set by user.
MAC Address MAC XX:XX:XX:XX:XX:XX Reports unique MAC address for each device.
Picture Settings
Black level Black level/0mV
-100 to +100mV
(in 1 mV steps)
Adjusts black level on monitor.
Contrast Contrast/0dB
-6 to +6 dB
(in 0.2 dB steps)
Adjusts overall contrast of monitor.
Colour Saturation Saturation/0dB
-6 to +6 dB
(in 0.2 dB steps)
Adjusts overall color saturation of monitor.
Luminance gamma Gamma/1
0.4 to 1.7
(in 0.1 steps)
Adjusts the luminance gamma curve to compen-
sate for monitors with a non-standard gamma
response.
Colour Temperature Colour Temp/6500K
4000 to 10000
(in 100K steps)
Adjusts overall brightness of monitor.
Black balance Green Black bal Green/0mV
-99.2mV to +99.2mV
(in 3.2mV steps)
Adjusts black balance of picture components. Black balance Blue Black bal Blue /0mV
-99.2mV to +99.2mV
(in 3.2mV steps)
Black balance Red Black bal Red/0mV
-99.2mV to +99.2mV
(in 3.2mV steps)
White balance Red White bal Red/0dB
-2 to +2 dB
(in 0.1 dB steps)
Adjusts white balance of picture components. White balance Green White bal Green/0dB
-2 to +2 dB
(in 0.1 dB steps)
White balance Blue White bal Blue/0dB
-2 to +2 dB
(in 0.1 dB steps)
Audio Setup
De-embedder group De-embedder group/1 1 to 4
Select which audio group from available audio
pairs to de-embed and output as analog.
See Status control group for Audio Pairs Present.
Audio Delay Audio Delay/0ms -30ms to +170ms
Adjusts the amount of audio delay relative to the
video processing delay within the module. Add
delay as necessary to compensate for video delays
in the display device.
Audio Delay Enable Delay/Enabled Enabled or Disabled Enable or disable audio delay.
Line output pair Line output pair/1 1, 2
Select Pair 1 or Pair 2 of the de-embedded audio
group as the output.
Line output level Line output level/+18dBu +12 to +24dBu Adjusts output level of line output pairs.
Line combine Line combine/Off Off, Pair, Combine
Selecting Pair sums channels 1 and 3 of de-embed
group and outputs on left analog channel. Adds
channels 2 and 4 of de-embed group and outputs
on right analog channel. Gain reduced by 6dB.
Selecting Combine sums all four channels of
de-embed groups and outputs on both left and
right analog channels. Gain reduced by 12dB.