Grass Valley 8947RDA-D - Manual (Page 19)

8947RDA-D/-FR — Instruction Manual 19
Installation
To install the optional fiber optic SFP device:
1. Slide the fiber optic SFP device into the cage connector connected to the
front module at the rear of the frame (label on right).
2. When installed properly, the front end of the SFP device will line up
with the rear module BNCs. Do not try to force it in further.
Figure 5. Fiber Optic SFP Device
To extract the fiber optic SFP device follow the steps below:
1. Remove the fiber cable first.
2. Unlock the module by flipping the handle to the left.
3. Remove the fiber optic SFP device by using its handle.
FIBER
J7
J9
J8
8431_03
r2
Label
Handle
Arrow Indicators:
Dual Receiver
Dual Transmitter
Transceiver