Grass Valley 8900NET v.4.4.0 - Manual (Page 55)

8900NET (Net Card) — Instruction Manual 55
Using the 8900NET GUI
Frame Power Supply Web Pages
Use
this
link
The frame Power Supply 1 or Power Supply 2 status web pages provide:
• Power Slot Status – pass/fail status of the supply and fan in the power
supply sled (see
Figure 30 ).
• A Frame Health Reports link is given to the Frame Health Reporting
web page (
page 42 ) where a fault report in the power supply can be
enabled or disabled as an alarm to the Frame Alarm connector on the
rear of the frame.
• An LED Reports link is given to the LED Reporting web page ( page 48 )
where the power supply status reporting to the PS1 and/or PS2 LED on
the front of the 8900NET module can be disabled if desired.
• When an SNMP manager is installed on the 8900NET module, an
SNMP Trap Reports link will be present. This will link to the SNMP
Reporting web page (
page 48 ) where power supply fault and removal
can be configured for reporting to the SNMP manager.
Figure 30. Power Supply Slot Status Page